What hitch class is required for a hitch-mounted winch?
Documented on the Winch on hitch | Let's build it build
Published July 11, 2026
Use at least a Class III (or higher) receiver for most medium-duty winches; verify the receiver's tongue weight and towing capacity against the winch and mount weight.
Full Answer
Use at least a Class III (or higher) receiver for most medium-duty winches; verify the receiver's tongue weight and towing capacity against the winch and mount weight. Heavier winches may require a reinforced or frame-mounted solution.
Documented In This Build
Related Knowledge
Can I bolt the winch mount instead of welding?How should the winch be wired to the vehicle?How do I ensure the mount is safe for recovery loads?What torque should I use on the blade bolt?What maintenance is required to keep the runtime optimal?What were the most critical problems found on the test drive?Can these issues be fixed cheaply or will it cost a lot?How do I know if the leak is from the oil pump or the tank?
Related Parts
Mounting hardware (grade 8 bolts, nuts, washers)
$25
Electric Winch (approx. 9,000–10,000 lb)
$400
Fairlead (roller or hawse)
$50
Winch wiring kit (contactor/solenoid, heavy gauge cables, fuse/CB)
$100
Steel plate and tubing for hitch mount (materials)
$80
Winch rope (synthetic) or steel cable
$80
Shackle / D-ring
$20
Remote control / switch
$25
Paint / rust protection
$15
Related Tools
Torque wrench
Socket set and wrenches
Drill / drill bits (metal)
Angle grinder with cutting and flap discs
MIG Welder
Measuring tools (tape, square, marker)
Bench vise / clamps
Battery terminal puller / wire crimper
Related Videos
Quick Cub Cadet Z2 Ultima 54 inch review
Project Front Loader Pt 3: Starting to assemble the bucket!
Poulan Pro PP19A42 Maintenance: Spindle Removal and Blade Sharpening
Soothing Lawn Mowing June 19th 2026, Cub Cadet Z2 54
First project vehicle and how I started it on fire
Project Front Loader: Pt1 testing our new stick welder