Will an aluminum driveshaft cause vibration?
Documented on the 1965 Ford Mustang build
Published June 20, 2026
A properly built and balanced aluminum driveshaft should not cause vibration.
Full Answer
A properly built and balanced aluminum driveshaft should not cause vibration. However, incorrect length, improper phasing/orientation, worn U-joints, or loose bolts can cause vibration. If vibration persists after correct installation, professional dynamic balancing may be required.
Documented In This Build
Related Knowledge
What torque should I use on the driveshaft flange bolts?Do I need new U-joints when installing an aluminum driveshaft?Do I need to shorten or modify the driveshaft for my '65 Mustang?Is an aluminum driveshaft safe for a high-power street or race car?What safety steps should I take before starting?How should I protect and organize the new wiring?Can I keep the original radio and still add Bluetooth?Can I use an F100 driveshaft in my '65 Mustang?
Related Parts
Aluminum driveshaft (one-piece or two-piece depending on model)
$900
Universal joint kit (U-joints) - rear & front if required
$60
Driveshaft flange bolts / hardware kit
$20
Related Tools
Torque wrench (ft-lb)
Floor jack
Socket set and ratchet / breaker bar
Pry bar / flatbar
Safety glasses and gloves
Marking tool (paint or scribe)
Jack stands (pair)
