Will a modern Bluetooth head unit physically fit in a 1965 Mustang dash?
Documented on the 1965 Ford Mustang build
Published February 26, 2026
Yes, but you may need a dash mounting kit or trim plate to adapt the modern 1-DIN or 2-DIN unit to the classic dash opening.
Full Answer
Yes, but you may need a dash mounting kit or trim plate to adapt the modern 1-DIN or 2-DIN unit to the classic dash opening. Some bezel modification or a custom pocket is sometimes required depending on dash configuration.
Documented In This Build
Related Knowledge
Can I keep the original radio and still add Bluetooth?Do I need a special wiring harness to install an aftermarket radio?What torque should I use on the driveshaft flange bolts?What safety steps should I take before starting?How should I protect and organize the new wiring?Can I use an F100 driveshaft in my '65 Mustang?What size U-joints do I need?How do I determine the correct driveshaft length?
Related Parts
Aftermarket Bluetooth head unit (1-DIN or 2-DIN)
Generic/Aftermarket (e.g., Pioneer, JVC, Kenwood)$120
Aftermarket radio wiring harness adapter (Ford classic car to aftermarket)
Metra/Scosche/Generic$20
Antenna adapter
Generic$10
Dash mounting kit / trim plate
Metra/Scosche/Generic$25
Replacement speakers (optional, pair)
Generic (e.g., Polk, JBL)$80
Related Tools
MultimeterGeneric
Socket wrench setGeneric
Wire stripper / crimperGeneric
Screwdriver set (Phillips & flat)Generic
Trim/panel removal toolsGeneric
Soldering iron and heat shrinkGeneric
Electrical tape / zip tiesGeneric
