How long does a water pump replacement take?
Documented on the 2017 Chevrolet Silverado 1500 build
Published August 30, 2026
For a competent DIYer with the right tools expect about 2–4 hours.
Full Answer
For a competent DIYer with the right tools expect about 2–4 hours. Time varies with experience, whether additional components must be removed, and how easily bolts come out.
Documented In This Build
Related Knowledge
How do I bleed air from the cooling system after installing the pump?What are common causes of premature water pump failure?Do I need to replace the thermostat or serpentine belt when replacing the water pump?What coolant should I use for a 2017 Silverado 1500?Can I tap the reverse light power instead of running a dedicated trigger wire?What size fuse should I use for the amp power wire?How do I route wires through the tailgate hinge without chafing?How much cooling can I expect for a garage?
Related Parts
Water Pump
$150
Water Pump Gasket / Seal
$10
Engine Coolant (2 gallons estimate)
$30
Related Tools
Torque wrench
Socket set and ratchet
Pliers / screwdrivers
Drain pan
Serpentine belt tool / breaker bar
Funnel and coolant bleeding tools
Jack and jack stands (or ramps)
