What hitch class do I need to mount a winch?
Documented on the Winch on hitch | Let's build it PT 3 build
Published July 13, 2026
Most hitch-mounted winch plates are designed for 2" Class III receivers.
Full Answer
Most hitch-mounted winch plates are designed for 2" Class III receivers. Check the winch plate manufacturer recommendations and the receiver's tongue weight and gross trailer weight ratings to ensure compatibility.
Documented In This Build
Related Knowledge
How should I wire the winch to the battery safely?Can I leave the winch mounted all the time?What maintenance does the winch and rope need?What torque should I use on the driveshaft flange bolts?Can I use an F100 driveshaft in my '65 Mustang?What size U-joints do I need?How do I determine the correct driveshaft length?Do I need new U-joints when installing an aluminum driveshaft?
Related Parts
Electric Winch (medium-duty)
$450
Hitch-mounted winch plate / winch mount
$150
2" Receiver Hitch (if replacement needed)
$100
Synthetic Winch Rope / Steel Cable
$80
Fairlead ( roller or hawse )
$60
D-shackles / Bow shackles
$20
Winch wiring kit (heavy gauge cable, solenoid/contactor, fuse/CB)
$60
Winch remote (wired or wireless)
$30
Mounting hardware kit (bolts, washers, nuts, locknuts)
$25
Related Tools
Torque wrench
Multimeter
Measuring tape and marker
Wire crimper and stripper
Drill and metal bits
Angle grinder / cutting tool (optional)
Floor jack and jack stands or vehicle ramps
Protective gloves and eye protection
Socket set (metric & SAE)
Related Videos
F100 Driveshaft Transformed into Mustang Custom Build
Winch on hitch | Let's build it PT 2
Installing a new aluminum driveshaft in a 65 Mustang
Wednesday Morning Silent drive in the 65 Mustang
Test driving the 65 Mustang - Houstan we have Problems!
Driveshaft build failure but heres how I tried to succeed